Beluga Inverter-Schwimmbadwärmepumpe, 33K/50K/58K/75K BTU
Beluga Inverter-Schwimmbadwärmepumpe, 33K/50K/58K/75K BTU
SKU: | SKU: 707-PHP-B33V-A*SEC
Nicht vorrätig
Verfügbarkeit für Abholungen konnte nicht geladen werden
Description
Description
- Full DC inverter adjusts heating intelligently
- Uses ambient air, not fuel, to heat water
- B33V: 32,412 BTU | COP 15.8 | ≤10,000 gal
- B50V: 52,200 BTU | COP 15.9 | ≤16,000 gal
- B58V: 58,004 BTU | COP 18.2 | ≤18,000 gal
- B75V: 72,400 BTU | COP 18.1 | ≤21,100 gal
- B100V: 95,563 BTU | COP 15.8 | ≤26,000 gal
- Not for inflatable or low-pressure pools
Verlängern Sie Ihre Badesaison komfortabel
The TURBRO Beluga series pool heat pump is designed to maintain a consistent pool temperature, allowing you to enjoy swimming during cooler spring and fall days; please note that it is not intended to turn your pool into a hot tub
Wechselrichtertechnologie
The Beluga series features a renowned brand’s full DC inverter compressor; intelligently adjusts the heating power based on ambient temperature, water flow, and set temperature to ensure a stable water temperature
Kostensparende Wahl
Harnesses heat from the air rather than generating heat, helping you cut energy costs by up to 40% compared to natural gas and up to 70% compared to propane.
- B33V: Heating capacity up to 32,412 BTU, COP 15.8
- B50V: Heating capacity up to 52,200 BTU, COP 18.18
- B58V: Heating capacity up to 58,004 BTU, COP 15.8
- B75V: Heating capacity up to 72,400 BTU, COP 18.1
- B100V: Heating capacity up to 95,563 BTU, COP 15.8
Pool Heat Pump Size Calculator
Disclaimer:
This calculation uses the thermal energy conservation method: Total BTUs = (Volume × 8.34 × ΔT). A 2.0x efficiency factor is applied to account for heat loss to the environment during the heating process.
Actual heating performance may vary depending on several factors, including:
- Use of a pool cover (highly recommended)
- Wind exposure and ambient air temperature
- Humidity levels and sun exposure
For air temperatures below 50°F (10°C), heat pump efficiency drops significantly and heating times will increase.
High-Performance Components
UL Certified for safety and quality assurance, backed by a 5-Year Compressor Warranty and 2-Year Full Unit Warranty for long-term peace of mind.
Korrosionsbeständig, seewassergeeignet.
Gleichbleibende und angenehme Wassertemperatur.
Bürstenloses Design, längere Lebensdauer.
Nahtloser Wechsel zwischen Heiz- und Kühlmodus.
Was Influencer sagen
Häufig gestellte Fragen
It features cooling and heating modes to work within an ambient temperature range of 5-109°F. Operating outside this range will trigger a malfunction and potentially damage the unit.
Taking several days to reach your desired temperature is NORMAL. Performance can be affected by various factors, including ambient temperature, water volume, pool insulation quality, wind exposure, proper installation, and regular maintenance.
Make sure to let the unit sit upright for over 24 hours before use. We suggest installing barriers like fences or plants around the pool to lower wind impact on the water surface. Use a pool cover to retain heat and reduce evaporation.
The Beluga series requires professional installation. Particularly for models B58V, B50V, and B75V, which must be hardwired to 220-240V by a certified electrician.
Yes. The unit features a titanium heat exchanger, which is corrosion-resistant. However, please ensure that the heat pump is installed upstream of the saltwater pool and a check valve is installed between them to prevent any backflow.
This unit features an auto-defrost function to prevent ice buildup on the unit, ensuring consistent heating efficiency and extending the heat pump's lifespan in cold weather.
