Beluga Inverter Swimming Pool Heat Pump, 33K/50K/58K/75K BTU
Beluga Inverter Swimming Pool Heat Pump, 33K/50K/58K/75K BTU
Earn [points_amount] when you buy this item. Join Reward Program to get points for your purchase.
- Full DC inverter adjusts heating intelligently
- Uses ambient air, not fuel, to heat water
- B33V: 33,000 BTU | COP 15.8 | ≤10,000 gal
- B50V: 52,200 BTU | COP 15.9 | ≤16,000 gal
- B58V: 58,000 BTU | COP 15.8 | ≤18,000 gal
- B75V: 75,000 BTU | COP 16.2 | ≤21,100 gal
- Not for inflatable or low-pressure pools
In stock
Couldn't load pickup availability
Tips for Optimal Use
Use in outdoor temperatures of 60°F or higher for best performance. Efficiency depends on pool size and weather. In cooler temperatures, a pool cover helps minimize heat loss and speeds up heating.
The TURBRO Beluga series pool heat pump is designed to maintain a consistent pool temperature, allowing you to enjoy swimming during cooler spring and fall days; please note that it is not intended to turn your pool into a hot tub
The Beluga series features a renowned brand’s full DC inverter compressor; intelligently adjusts the heating power based on ambient temperature, water flow, and set temperature to ensure a stable water temperature
Harnesses heat from the air rather than generating heat; cut costs by up to 40% compared to using natural gas and up to 70% compared to propane; B50V features a heating capacity of up to 52,200 BTU and a COP rating of up to 15.9; B75V features a heating capacity of up to 75,000 BTU and a COP rating of up to 16.2
B50V suits swimming or spa pools up to 16,000 gallons (maximum size of 24.6-foot round or 30 by 20-foot oval); B75V suits pools up to 21,100 gallons (maximum size of 28.3-foot round or 20 by 40-foot oval); not recommended for inflatable pools due to low water pressure
Pool Heat Pump Tools
Pool Capacity Calculator
-
Oval Pool
-
Circular Pool
-
Rect Pool
FAQ
It features cooling and heating modes to work within an ambient temperature range of 5-109°F. Operating outside this range will trigger a malfunction and potentially damage the unit.
Taking several days to reach your desired temperature is NORMAL. Performance can be affected by various factors, including ambient temperature, water volume, pool insulation quality, wind exposure, proper installation, and regular maintenance.
Make sure to let the unit sit upright for over 24 hours before use. We suggest installing barriers like fences or plants around the pool to lower wind impact on the water surface. Use a pool cover to retain heat and reduce evaporation.
The Beluga series requires professional installation. Particularly for models B58V, B50V, and B75V, which must be hardwired to 220-240V by a certified electrician.
Yes. The unit features a titanium heat exchanger, which is corrosion-resistant. However, please ensure that the heat pump is installed upstream of the saltwater pool and a check valve is installed between them to prevent any backflow.
This unit features an auto-defrost function to prevent ice buildup on the unit, ensuring consistent heating efficiency and extending the heat pump's lifespan in cold weather.
