Frostcore Ice Bath Water Chiller for Cold Plunge
Frostcore Ice Bath Water Chiller for Cold Plunge
- No Ice Needed: The cold plunge chiller maintains water temperature from 36-86°F automatically, eliminating the need for ice. It's great for athletes, fitness enthusiasts, or anyone seeking to refresh after workouts, or a demanding day
- Universal Tub Compatibility: The ice bath chiller works with standard bathtubs, soaking tubs, inflatable tubs, and professional plunge tubs of 80-132 gal and delivers powerful 1HP cooling performance. For optimal performance, position the inlet and outlet pipes apart and away from the wall or bottom of the tubs
- Rapid Cooling System: Built-in circulation pump ensures stable water flow; rotary compressor and a titanium heat exchanger for better cooling efficiency; cools water from 110°F to 36°F in about 5-6 hours, depending on water volume, starting water temp, and the ambient temp
- 3-Stage Filtration System: This water chiller utilizes a 40μm filter that catches hair and debris, a 20-micron water filter that removes fine sediment (less than one minute replacement time), and an ozone generator that automatically sanitizes the water for lasting freshness
- Smart Wi-Fi Control: Operate via the touch panel or smartphone app (2.4GHz Wi-Fi required); use the app to set real-time clock and running schedules, lock or unlock the unit, activate disinfection, and monitor status from anywhere
- All-Weather Design: IPX4 waterproof and UV-resistant metal housing for outdoor use; the ice bath's SmartSense air-source system enables precise temperature control in ambient temperatures up to 109°F
- Advanced Safety Protections: The cold plunge water chiller is equipped with a GFCI plug for leakage protection, low-temperature alarm, freeze prevention, and a flow alarm that alerts you to check the filter for clogs
- Simple Setup: The 1 hp chiller for ice bath includes a manual, inlet and outlet water pipes, and camlock couplings; let the machine rest upright for 3-4 hours before first use; simple 5-minute installation for fast setup
In stock
Couldn't load pickup availability
Intuitive Touch Screen
- With a few taps on the touch panel, you can set the real-time clock, schedule your plunge, set your desired temperature, activate the disinfection mode, and lock/unlock the settings.
- The intuitive control panel continuously monitors system status. When the system detects an issue such as low water temperature or low pressure, it displays an error code for quick problem diagnosis.
Upgraded Insulation for Better Efficiency
- The water hose comes with pre-installed camlock fittings for a tool-free connection. Achieve a quick and simple setup in as little as minutes.
- Unlike generic, thin transparent hoses that lose cold quickly, our inlet and outlet pipes feature a thickened insulation jacket made from weather-resistant PE foam, which not only minimizes temperature loss but also reduces condensation buildup.
Portability Meets Everyday Convenience
- Two sturdy handles on each side make lifting and carrying manageable. When not in use, they fold away to save space.
- Heavy-duty casters enable easy movement across hard surfaces, with the two front wheels featuring locks for stability when in storage.
Thoughtful Design for Easy Maintenance
- The side drain allows you to empty all water from the internal system, preventing stagnant water during storage.
- The bottom drain releases condensation during use, which is a normal process, not a leak.
Plug-and-Play Installation
- The UL-certified GFCI plug provides crucial safety, automatically cutting power in the event of a fault.
- Your recovery zone shouldn’t be fixed. The 5.8 ft cord offers flexibility for placement in the bathroom, home gym, patio, or in the garage.
For a plunge-specific tub, simply connect the unit's outlet hose to the tub's inlet port, and the inlet hose to the tub's outlet port.
No special tub? No problem. Just place both hoses below the water surface. Please keep the hoses apart and prevent them from touching the walls or the bottom of the tub.
FAQ
Individual tolerance varies. Prior consultation with a healthcare professional is essential before use; follow medical advice accordingly. Individuals with specific health conditions should avoid ice baths.
Implementing safety measures is crucial. Key recommendations include:
- Always have supervision during sessions if you're new to ice bathing or have health concerns.
- Beginners should start with moderately cool temperatures and gradually decrease the temperature over time.
- Limit immersion time to 10-15 minutes to prevent the risk of hypothermia.
- Maintain hydration before/after sessions, as cold exposure accelerates fluid loss.
The 1HP system provides 3x faster cooling with greater capacity handling, making it suitable for daily intensive usage, commercial gym environments, and larger households
Note: Higher horsepower corresponds to increased power consumption and operational noise.
The minimum achievable water temperature is 36°F (2°C). It can cool water from 110°F to 36°F in approximately 5-6 hours. Please note that the actual cooling time is significantly influenced by your tub's size, the initial water temperature, and the ambient temperature.
Compatible with 80-132 gallon (300-500L) containers.
It works with both dedicated ice bath tubs and standard household/inflatable bathtubs. If your tub has 1/2"NPT internal threads, you may use the waterpipe adapter (included in the package) to establish the connection.
Yes, setup is straightforward. The package includes an instruction manual and all necessary accessories. Following the instructions, installation can be completed in as fast as 5-10 minutes. Simply plug it in to start; no extra wiring is needed. Please feel free to contact us if you have any questions.
Neither is required.
Simply set your desired water temperature, and the unit will automatically maintain it at that level for maximum convenience.
The external 40μm prefilter is reusable; simply remove and clean it when visible debris or hair accumulates. The internal 20-micron water filter is recommended to be replaced every 4-8 weeks, depending on usage frequency and local water quality. Replacement is quick and easy, taking less than a minute. A separate 5-pack of replacement filters is available for purchase.
It is recommended to change the water every 2-4 weeks (with the disinfection function activated). Adjust the frequency flexibly based on usage and by observing the color of the filter.
Its IPX4 rating protects it from water splashes in outdoor use. However, it should be protected from heavy rain or prolonged exposure. It can operate in ambient temperatures up to 109°F, but do not use it at or below 34°F, as this may damage the unit.
It is generally recommended to turn the unit off when not in use, unless the interval between two ice bath sessions is very short. (It is advisable to consult a healthcare professional regarding the recommended frequency and duration of ice baths.)
| Model | FrostCore F85 |
| Max. Cooling Capacity | 9,553 Btu/h |
| Rated Power | 1,030 W |
| EER(BTU/W) | 9.27 |
| Power Supply | AC 110-120 V/ 60 Hz |
| Max. Input Current | 14 A |
| Set Water Temp. Range | 36-86°F |
| Refrigerant | R32 |
| Running Ambient Temp. | 36-109°F |
| Rated Water Flow | 3.5 GPM |
| Max. High/Low Pressure | 609/ 174 PSI |
| Water Pipe Connection | 1/2" NPT |
| Waterproof Level | IPX4 |
